Description

10A/30A product selling points:

1. Suitable for 1/16, 1/18, 1/24 remote control climbing car, military truck semi-big truck modification, remote control boat, light weight and suitable for mini-Z mosquito car modification

2. Using high-quality materials, the quality is guaranteed

3. Lithium capacitors have large capacity and high withstand voltage

4. High power, increase the anti-breakdown wire capacitance, the back electromotive force of MOTOR is very large, especially suitable for fast-start racing sports

5. The product has many functions: forward, reverse, brake

Product name: 10A brushed ESC

Working voltage: 4.8V-8.4V (suitable for 2S lithium battery)

Current (A): 10A

Drive frequency: 2kHz

Input: Li Po 2S/Ni-MH/Ni-Cd 4-7 battery

Constant current: 10A, 15A＜5s

UBEC output: voltage 5V, current 1A

This ESC can be matched with 130/180/260/280/380 brush motor

Adjustment: The ESC is in the middle range, the new controller needs to fine-tune the throttle, so that the ESC light does not light, keep it in the neutral position, the throttle fine-tuning of the controller is TH TRIM

Product name: 30A brushed ESC

Working voltage: 4.8V--8.4V (suitable for 2S lithium battery)

Current (A): 20A

Drive frequency: 2kHz

Input: Li Po 2S/Ni-MH/Ni-Cd 4-7 battery

Constant current: 20A, 25A<30s pulse 50A<5s

UBEC output: voltage 5.7V, current 1A

This ESC can be matched with 130/180/260/280/380 brush motor

Adjustment: The ESC is in the middle range, the new controller needs to fine-tune the throttle, so that the ESC light does not light, keep it in the neutral position, the throttle fine-tuning of the controller is TH TRIM

320A product selling points:

1. With waterproof function

2. The remote control car two-way waterproof ESC supports 3S lithium battery

3. Suitable for car and boat models

4. Automatically find the center position

5. High frequency drive system

6. Use low internal resistance field effect tube

Product parameters:

Battery support: NiMH, NiCd 4~6 groups (4.8V~7.2V), Lithium battery 3 groups (6V-12V)

Current parameters: forward 320A, backward 160A, brake 270A

BEC output: voltage 5.6V, current 2A (supply power for receiver and steering gear)

Special attention: This ESC, with 3S (12V), can only carry a motor no larger than 380, and with 2S (8.4V), only with a motor no larger than 540

Operation guide:

1. Connect it to the power supply battery correctly. The red wire at both ends of the terminal board is the positive pole, and the black one is the negative pole (or connect to the standard DC battery plug Datian male plug/T plug/banana plug)

2. The red and black wires of the ESC output are respectively connected to the red and black wires of the 540 motor of the car

3. Turn on the power switch of the ESC, the motor will make a "beep" sound, and then turn on the power of the transmitter, the motor will make a "duo~la~mi" sound, which proves that the remote control signal has been successfully connected to the ESC